Buy an Aqua Rite flow switch from Pool Guy Supply and solve all your pool chlorination problems.
What is an Aqua Rite flow switch?
The Aqua Rite flow switch ensures that water is flowing through your pool cell correctly and is generating enough chlorine. It can be used in Aqualogic, Aquarite and Aqua Trol pool plumbing systems.
Easy installation of your Aqua Rite flow switch
You should leave 12 clear inches of straight pipe before installing your flow sensor. Plumbing your sensor in after the cell? No problem, just include the size of your cell when you’re measuring your pipe run.
Don’t forget, your flow sensor should always be installed in the same section of plumbing as your T-cell. Install it anywhere else and you could find explosive gases accumulating.
One more hint to help you get the best from your sensor: make sure that the arrow on the switch itself points in the same direction as the water flow.
Is your salt system control panel reading No Flow? This usually means your flow switch needs to be replaced, but be sure to check. If you’ve got a No Flow reading and do actually have a low water flow through the sensor, you may have another issue.