The versatile Pentair Temperature Sensor is compatible with IntelliTouch, EasyTouch and SunTouch systems, and can be used to assess water, air and solar temperatures.

To ascertain the temperature of your pool, simply drill a small hole in the pipe between the filter pump and the filter. Using a hose clamp, attach your sensor to the pipe and you’re all done.

To assess air temperature, mount your Pentair Temperature Sensor away from your power center, air conditioners, motors, and other sources of heat. It’s also wise to keep your device out of direct sunlight if you want an accurate reading.

To test unglazed solar panel temperature, fit your device adjacent to the panels. Alternatively, if yours are glazed panels, suspend the device between the glazing and the collector.

Pentair temperature sensor: why it’s the right choice

The Pentair Sensor enjoys compatibility with a large number of pool management systems as well as Compool LX220/2TX and LX220/B solar control systems. It‘s also set up to replace TS5T and STS5T series models.